WC dry wall installation
Monteringsanvisning

WC dry wall installation
(mechanical fixing method and adhesive bonded)

Building boards prefabricated elements wedi I-Board and wedi I.Board plus

wedi I-Board (1200 x 1245 x 20 mm) is a prefabricated fitting element for cladding of wall-mounted WCs. With a width of 1,200 mm, it can easily be adapted to virtually all specific needs. Despite its light weight, it is extremely strong and stable (up to 400 kg from a tile size of 10 x 10 cm). The installation cladding board can be tiled directly after fitting without further pre-treatment.
Especially for plaster and mosaic tiling - the wedi I-Board Plus combines all the benefits of the tried and tested wedi I-Board but has an additional reinforcement plate integrated in the factory.
Step 1 Step 1

First cut the wedi I-Board to the required size with a utility knife.
Step 2 Step 2
Step 3 Step 3

Using a jigsaw, cut out a suitable opening for the flush actuator.
Step 4a Step 4a

The prepared and cut I-board is mechanically attached to the dry wall installation using the supplied rapid fit screws in conjunction with the insulating board discs. (As an alternative to step 4b)
Step 4b Step 4b

Attach the wedi I-Board on the framework using wedi 610 adhesive sealant. (As an alternative to step 4a)
Step 5 Step 5

Now attach the previously cut strips of wedi I-Board to the top and sides with wedi 610 adhesive sealant. Apply self-adhesive wedi Tools reinforcement tape to the joints and connection areas.
Step 6 Step 6
Step 7 Step 7

The wedi I-Board can be tiled directly after reinforcement without further pre-treatment.
Step 8 Step 8

The joints between the wall covering and the flooring and the corner joints of the wall covering should be formed as expansion joints..
Step 9 Step 9
I-Board Plus I-Board Plus

First cut the wedi I-Board to the required size with a utility knife.
Step 2 Step 2
Step 3 Step 3

Using a jigsaw, cut out a suitable opening for the flush actuator.
Step 4 Step 4
Step 5 Step 5
Step 6a Step 6a

The prepared and cut I-board is mechanically attached to the dry wall installation using the supplied rapid fit screws in conjunction with the insulating board discs.
Step 6b Step 6b

Attach the wedi I-Board plus on the framework using wedi 610 adhesive sealant.
Step 7 Step 7

Now attach the previously cut strips of wedi I-Board plus to the top and sides with wedi 610 adhesive sealant. Apply self-adhesive wedi Tools reinforcement tape to the joints and connection areas.
Step 8 Step 8
Step 9a Step 9a

The wedi I-Board plus can be tiled directly after reinforcement without further pre-treatment.
Step 10 Step 10

The joints between the wall covering and the flooring and the corner joints of the wall covering should be formed as expansion joints..
Step 11a Step 11a
Step 12a Step 12a
Step 9b Step 9b

The wedi I-Board plus can be plastered directly after reinforcement without further pre-treatment.
Step 11b Step 11b
Step 12b Step 12b
wedi I-Board – Dry wall installations
wedi
In order to display YouTube/Vimeo videos, it is necessary that you accept marketing cookies. Please see our privacy policy for more information. To the cookie settings

At a glance

Technical data sheet wedi I-board 0.10 MB)

wedi system components

wedi I-Board and I-Board plus wedi Tools dowels wedi 610 adhessive sealant wedi Tools reinforcement tape self-adhessive

Persondataerklæring