Fundo Riolito | Floor profile
Floor-level shower systems
The Fundo Riolito profile is specifically designed for the Fundo Riolito floor element. It provides a visually attractive transition from the sloped surface of the floor element to the level flooring. It is available in left and right versions and in several heights, and it is easy to install. This new slope profile offers a strong combination of design and protection with floor-level showers.
Step 1
The Fundo Riolito profile is produced in pre-cut lengths for use with 1,200 mm Fundo Riolito floor elements.
Step 2
However, it can easily be cut shorter at the marked notch for use with 900 mm Fundo Riolito floor elements.
Step 3
In the transition area between the Fundo floor element and the screed, apply tile adhesive to the alternative sealing system (wedi Tools sealing tape and Fundo sealing set) …
Step 4
... and embed the sloped profile. The Riolito profile is available in left and right version. The correct side is determined when viewing towards the floor drain.
Step 5
Apply tile adhesive with a grooved trowel and press the tiles in place.
Step 6
Finish by tiling and grouting the floor element. The figure shows the left version of the profile.
