Tension decoupling
Area of application

Tension decoupling

Tension decoupling with wedi Subliner Flex

Subliner Flex serves for safe decoupling and reducing tension between top layers of ceramic tiles, slabs, and natural stone and the substrate for interior applications only. It has excellent crackbridging properties and is ideally suited for use in renovations and restorations due to its low thickness.
Step 1 Step 1 Lay out wedi Subliner Flex and cut by using carpet cutter or scissors.
Step 2 Step 2 Apply wedi thin-bed mortar onto prepared surface, using 4 mm or 6 mm groove.
Step 3 Step 3 Place wedi Subliner Flex edge to edge – with the printed face upwards – and press by using a rubber roller or wooden board.
Step 4 Step 4 Place wedi Subliner Flex edge to edge – with the printed face upwards – and press by using a rubber roller or wooden board.
Step 5 Step 5 The floor covering can be installed after curing of the thin-bed mortar.

At a glance

Technical data sheet Subliner Flex 0.13 MB)

wedi system components

wedi Subliner Flex
Privacy Policy